Ford Engine Details


	Engines


	C6 Transmissions


	GSE Parts


	Deicer Parts


	Lav Fittings


	Kaiser Air Start Couplings


	GPU


	PCA


	eSage

Sage Parts Ford 300 CID (4.9L) Remanufactured Engines

These Engines are GSE Tested and Proven

2 Year Warranty with Labor Reimbursement*


Standard Components - Sage Parts Remanufactured Ford 300 CID (4.9L) Engine 100% New Hypereutectic Pistons 8:1 Ratio Chrome Moly Rings Steel Industrial Timing Gears Aluminum Silicon Alloy Main and Rod Bearings FelPro Rear Main Seal FelPro Head Gaskets New Hydraulic Lifters Viton Valve Stem Seals New High Volume Oil Pump and Pick-Up Tube Standard Machine Shop Processes 100% Magnafluxed and Checked for Cracks 100% Heads Surfaced 100% Blocks Surfaced 100% Triple Angle Cut Valve Seats Plateau Diamond Honed Cylinder Walls 100% Oil Galleys Cleaned and Flushed 100% Threaded Holes Tap Chased All cylinders are bored to standard oversize and measured at three locations assure uniformity and straightness Maximum Crank Shaft Undersize is .020/.020 Every Crankshaft is reground and micro-polished to an 8-12 micro-inch finish All camshafts are new or reground to greater than OEM tolerances Valve seats are machined to "Triple Angle" precision for best performance and valve/seat life Valve guides are replaced or machined to greater than OEM tolerances All tolerances are 50% tighter than OE for less wear and longer durability


			Engine Configurations

SAGE PARTS FORD 300 EXCHANGE ENGINE PROGRAM Click on Shopping Cart for Pricing
FORD 300 COMPLETE DYNO TESTED DROP IN GASOLINE ENGINES (LESS ALTERNATOR, FAN AND PULLEYS)
Early Model Engine with 3.6 Inch Water Pump Height
Part Number	eSage Ordering	Description	Core Part Number	eSage Ordering
300F1		300 FORD, 2 GROOVE HARMONIC BALANCER, 3.6 INCH WATER PUMP HEIGHT, AND STARTER	300FWMCORE
300F2		300 FORD, 2 GROOVE HARMONIC BALANCER, 3.6 INCH WATER PUMP HEIGHT, NO CARB OR GOVERNOR	300FWMCORE
300F3		300 FORD, GROOVE HARMONIC BALANCER, 3.6 INCH WATER PUMP HEIGHT, NIPPONDENSO VERSION STARTER	300FWMCORE
300F7		300 FORD, 2 GROOVE HARMONIC BALANCER, 3.6 INCH WATER PUMP HEIGHT, AND STARTER	300FWMCORE
Late Model Engine with 4.27 Inch Water Pump Height
300F4		300 FORD, 2 GROOVE HARMONIC BALANCER, 4.27 INCH WATER PUMP HEIGHT, 3205 STARTER	300FWMCORE
300F5		300 FORD, 3 GROOVE HARMONIC BALANCER, 4.27 INCH WATER PUMP HEIGHT, AND STARTER	300FWMCORE
300F6		300 FORD, 2 GROOVE HARMONIC BALANCER, 4.27 INCH WATER PUMP HEIGHT, AND STARTER	300FWMCORE
300F8		300 FORD, 2 GROOVE HARMONIC BALANCER, 4.27 INCH WATER PUMP HEIGHT, AND STARTER. FOR, EFI USE, NO CARB OR GOVERNOR INCLUDED	300FWMCORE
GASOLINE LONG BLOCKS
300 FORD LONG BLOCKS (REBUILT ENGINE WITH HEAD AND TIN ONLY NO MANIFOLDS)
300LB3G		300 FORD, LONG BLOCK, 3 GROOVE BALANCER	300FLBCORE
300LB2G		300 FORD, LONG BLOCK, 2 GROOVE BALANCER	300FLBCORE
300 FORD LONG BLOCKS WITH MANIFOLDS, HEAD AND TIN ONLY)
300LB2GWM		300 FORD, LONG BLOCK, 2 GROOVE BALANCER, WITH MANIFOLDS	300FWMCORE
300LB3GWM		300 FORD, LONG BLOCK, 3 GROOVE BALANCER, WITH MANIFOLDS	300FWMCORE
300 FORD SHORT BLOCK (REBUILT SHORT BLOCK ONLY, NO HEAD)
300FSB		300 FORD, SHORT BLOCK, NO HARMONIC BALANCER	300FSBCORE
300 FORD ENGINES FOR "DRY FUEL" ( PROPANE AND LPG)
300 FORD LONG BLOCKS (REBUILT ENGINE WITH HEAD AND TIN ONLY NO MANIFOLDS)
300FLBP		300 FORD, LONG BLOCK, NO BALANCER, NO MANIFOLDS, DRY FUEL	300FLBCORE
300LB2P		300 FORD, LONG BLOCK, 2 GROOVE BALANCER, NO MANIFOLDS, DRY FUEL	300FLBCORE
300LB3P		300 FORD, LONG BLOCK, 3 GROOVE BALANCER, NO MANIFOLDS, DRY FUEL	300FLBCORE
300 FORD COMPLETE "DYNO TESTED" DROP IN DRY FUEL ENGINES LESS ALTERNATOR, FAN AND PULLEYS
300F10		300 FORD, 2 GROOVE BALANCER, 4.27 INCH WATER PUMP HEIGHT, AND STARTER. FOR DRY FUEL	300FWMCORE
300F11		300 FORD, 3 GROOVE BALANCER, 4.27 INCH WATER PUMP HEIGHT, AND STARTER. FOR DRY FUEL	300FWMCORE

* Warranty Information

All Parts and Labor are warranted for TWO YEARS from the date of installation in well-maintained industrial applications (service records may be required). On accessorized packages the warranty extends to all “New” Sage installed components. In addition, the warranty will reimburse up to $250 towards labor for the removal, repair and/or replacement of engine. Click for detailed information.

Prices, availability, part numbers, and brands are subject to change without notice. The prices listed are for items shipped directly from Sage Parts warehouses located in the United States. All prices shown are in United States dollars. If a product is not in stock when you place your order, we will do our best to let you know and to let you know when we anticipate the product will be available. Anticipated delivery dates are dependent upon vendor supplies and other factors and are subject to change. Please read our Terms and Conditions carefully. The Trademarks shown on this web site may be registered trademarks of their respective companies. A core fee will will be charged to your order. When the core is returned, the customer will be given core credit. All cores must be returned in their original box or shipping container. All cores must be returned within 365 days from the date of purchase. See additional details,