THE WORLD LEADER IN REPLACEMENT PARTS FOR AVIATION GROUND SUPPORT EQUIPMENT

Ramptech logo

RAMPTECH® Ultralyte LayFlat Ducting

DOWNLOAD ULTRALYTE LAYFLAT CATALOG
DOWNLOAD PRODUCT SHEET
Ultralyte Ducting 1

Lightweight construction. Heavy-duty performance.

It’s the best of both worlds. RAMPTECH® UltraLyte™ PCA Layflat Ducting from Sage Parts revolutionizes PCA ducting design by combining super lightweight convenience with unsurpassed performance to tackle any and all rigors the aviation industry can throw at it.

Reinforced seams are lockstitched with high strength polyester thread. The result? No unraveling. And three-ply fabric prevents wicking and will not degrade when exposed to Skydrol or other ramp chemicals, providing outstanding durability. It all adds up to longer service life, extensive cost savings and strong return on investment over the product lifecycle.

RampTechUltraLyte2The Outer Layer

The high strength yellow ballistic nylon outer shell is urethane coated for much better abrasion resistance than any lightweight PCA ducting available today. The fabric is resistant to the usual degrading effects of Glycol Alcohol or Skydrol exposure. Additionally, the outer shell is UV stabilized for protection against harmful sun degradation.

The Insulation Layer

The middle layer is a patented polypropylene fabric that is metalized on one side for superb radiant heat insulation. Its unique construction allows the material to flex without cracking or flaking. The material is also designed to inhibit growth of fungi and bacteria.

The Inner Layer

The high strength inner liner consists of a tightly woven, rip-resistant, urethane-coated nylon material, which is designed to withstand the heavy wear associated with the airline industry.

RampTechUltraLyte main2

SPECIFICATIONS

  • MATERIAL WEIGHT
    Outer Shell: 9.3 oz./yd.2 (315 g/m2)
    Inner: 5.9 oz./yd.2 (200 g/m2)
  • TEMPERATURE
    -20°F to 180°F (-29°C to 82°C)
  • TRAPEZOID TEAR
    Outer Shell: Warp: 110 lbs./in.2 (77,338 kg/m2 | Fill=70 lbs./in.2 (49,215 kg/m2)
    Inner Liner: Warp: 85 lbs./in.2 (59,761 kg/m2) | Fill 30 lbs./in.2 (21,092 kg/m2
  • ABRADE TO FAILURE
    Outer Shell: 2,125 Cycles
  • DIAMETER
    8, 12 and 14 in. (203 mm, 305 mm, 356 mm)
  • LENGTH
    10, 15, 20, 25, and 30 ft. (3 m, 4.6 m, 6.1 m, 7.6 m, 9.1 m)
  • COLOR
    Yellow
  • OPTIONAL ENDS
    Fold Over Velcro® Cuff, Soft Cuff, or Zipper Cuff